2014-2020 8HP70, 8HP75, 8HP90, 8HP95 Transmission Thermostat Cooler Bypass ZeroStat Patented Technology

Product Description

2014-2020 8HP70, 8HP75, 8HP90, 8HP95 Transmission Thermostat Cooler Bypass

There also have been numerous melted down transmissions due to the bypass valve sticking in the cold closed position. Additionally the factory thermostat valve makes your transmission run hot almost immediately. The factory design restricts cooler flow until the thermostat opens at approximately 180 degrees. This means that almost immediately your transmission will be running hot. Lastly, the thermal bypass has a large restriction in it which reduces cooler flow by 87%, yes you read that right, 87%! No other bypass offers full unrestricted flow like the RevMax version does!

The completely re-engineered, Billet 6061 Aluminum RevMax Cooler Thermostatic Bypass Upgrade module, completely fixes all these complaints. Utilizing our ZeroStat Technology this upgrade has several features and is a must upgrade for your vehicle!

1. RevMax ZeroStat Patented Technology, US Patent #11,137,070 .Instead of closing off cooler flow when the transmission is cold and making your transmission generate unneeded heat that is hard to shed later; our bypass allows your cooler to immediately begin cooling your transmission and not waiting for it to get hot, just to try to cool it later.

2. You cannot properly flush your cooler lines without the aid of a hot flush machine that can get hot enough to open the bypass valve up. With our bypass upgrade you can use room temperature fluid to clean out your cooler at anytime you wish without any special tools!

3. There is no longer a thermal controlled bypass valve which can fail and cause lack of cooler flow and complete transmission destruction.

The RevMax Transmission Cooler Thermostatic Bypass Upgrade is a direct bolt in replacement. No lines are cut, nothing is altered. Simply disconnect your old lines and install the new thermostat bypass system. Installation takes about 15 minutes!